A Review On Internet Cafe Networks Information Technology Essay

A Review On Internet Cafe Networks Information Technology Essay This assignment is based on the network implementation of internet cafe which is based near the campus of University of East London. We have to design and implement a network and describe the Local Area Network and Wide Area Network management. We have to describe the cost effectiveness solutions with software and hardware we use in this network with justifications. Different layers will also be discussed at different stages in this assignment. Different IP schemes and other network suggestions will be discussed. This assignment also includes conclusion and references of the research used to build this assignment. Research method plays an important role in this assignment. Introduction to ARPANET: Advance Research Projects Agency Network (ARPANET) is the worlds first Network which gives Packet Switching and allows access over network widely. Packet switching helps in establishing a communication link. It was started in the mid 1968. It started through LAN. Phenomenon of Internet cafe: We have to work on internet cafe project which is close to University of East London. This cafe is exists on three floors, and we have to connect or share 75 computers in cost effective solutions. These all computers should be registered with the single IP address. OSI layers have to been defined at different stages on the network. TCP/IP systems relate to local area network and the internet. This network has to been defined using network layout diagram. Network Cost and specifications: This project of internet cafe would require 75 computers, 1 router, 4 switches, LAN cables and 3 printers. A normal computer specification should be: 1 GB RAM At least 2.1 GHZ processor (Intel or Atom) 150 GB hard disk 17 Display Standard USB keyboard Standard USB mouse CD/DVD ROM This is normal system specifications which could be used in internet cafe and can be easily used by the customer. Normally when computers are purchased in bulk for a computer lab or internet cafe system, loyalty discount is normally given by that provider. This specification would estimate cost around  £250  £300 as according to Currys or PC world. Dell computers are normally recommended and purchasing from DELL can be more cost effective. Router We also have to use a router. As this is internet cafe connection, so there should be powerful router connection which could enable more surfers to use internet more easily. There is a router which has recently been launched (EDIMAX BR-6574n Wireless Gigabit Router) this is really power and is available at Currys store for  £80. Apart from that, there are other NETGEAR routers as well which range starts from  £30. Switches We would also need at least 4 switches. Cisco switches are normally recommended by engineers. They are quite fast and comply with the requirement of network. It normally costs around  £100. Some Belkin and Netgear switches are cheaper as well. LAN cable We wo ­uld need LAN cables to make connections overall on the network to connect computers with switches and router. RJ-45 connector cable is used for this purpose. A 50 meter Ethernet LAN cable costs about  £5. The more length would be needed, more prices would be increased. Printers We can also add Printers to the network. It is essential in network computers to have a printer but it is not recommended or compulsory. Normally Printer ranges from  £40 that is all in one, which is better for home and office purposes as it includes Printer, Scanner and Copier. Implementation of Network: We have to work on internet cafe. Cafe has 3 floors and we have arranged 75 computers over three floors. We have to place 3 computers for server purpose. We can divide 25 computers on three floors and also 3 computers as server on third floor. To make a network local, we connect computers first using switch. On first floor, we will place 25 computers, and we have connected these 25 computers using Fibre cable for LAN (Local Area Network). Also we need 3 printers to share on three floors and we connect 1 printer on each floor. We connect all 25 computers and 1 printer with switch. This process has to be repeated on three floors, and then we have to connect them with router. Server computers will be connected with router directly but through switch. When server is directly connected with router, it enables firewall implementation and sharing among the network with secure authentication. LAN is used to connect computers within local area and make a network between them. We use this network in this case to connect computers within the same building. After connecting them through LAN cable, we connect them to Switch. HUB is also called concentrator or multi station access unit (MAU). A normal hub contains 8 to 24 ports for the computers and other devices. It works as a multiple port repeater. It receives a digital signal and re amplifies or regenerates that signal. It then forwards the digital signal to all ports on the hub without looking at any data. Switch is also used for the same purpose as hub but it is more intelligent device. It operates at data link layer of OSI model. The biggest benefit of using switches instead of hubs is that each switch port has its own collision domain. Switch plays really an important role in network. Once they are connected with hub or switch, they will be connected with ROUTER. ROUTER ROUTER is a device which connects multiple networks using similar or different protocols. It manages the route between any two communication networks. IP address will remain the same because there is just one router and it will supply access to all four switches. Each Switch which is having 25 computers and 1 printer on three floors and third one is also having server computers on it will connect with switch which will lead to router. Each computer will have different IP but their ISP will be one only as this will be provided by service provider. After three sets of 75 computers and three printers connected with Switch which is connected to router, after this process we connect one more switch with router which has 3 server computers on it. One server would be file server or printer server, and one would be DHCP/Authentication/Certification server and DNS server. This server system would help in file or printer sharing along the network to protect the computers with firewall option and also to provide certification to computers for different task over the network. OSI OSI stands for Open System Interconnection. It is a set of protocols that allows any two different systems to communicate regardless of their underlying architectures. This physical connection of router with switch and computers comes in Physical Layer of OSI model. Physical layer relates the electrical, optical, mechanical and functional interface to the cable as it defines how the cable is attached to the network adaptor card. Connection of computers with Switch includes Data Link Layer of OSI model. It sends data frames from network later to physical layer. Router is supplying single IP address, and each computer has different IP address. This concept involves Network Layer of OSI model which is responsible for putting data segments into packets. Transport layer works after Network Layer which is responsible segmenting data. It ensures that packets are delivered free of errors with no loss. For implementation of Network especially of Internet cafe, some softwares have also been recommended. Cyber cafe management and installation of networking protocols like IPX, SPX and TCP/IP. This thing comes in Session Layer. The main purpose of session layer is to establish a connection through application running on two different computers. Presentation layer and Application layer are after session layer. Presentation layer is used to determine the format of exchanging the data among network. Application layer handles network access, control the flow and recover errors. Addressing Scheme: Addressing scheme plays an important role in network. TCP/IP, IPv4, IPv6 are essentials of Network scheme. They are normally set to default but they can be changed according to the requirements. Each network system must be identified as unique. This is done through MAC address of device. Each machine always has different IP address on the network. TCP/IP is known as transmission control protocol/Internet protocol. It is a technology that is used to manage the transmission of data by breaking it into packets. These packets travel through router. TCP/IP addressing scheme is used in implementation of this network. This network scheme is normally used for sharing of computers over the network and gives them internet access. IPv4 (Internet Protocol version 4) addressing scheme is really important in a network. The most important aspect of IPv4 is its size. It is most widely organized internet layer protocol. It is a connectionless protocol used for packet switching link layer. IPv4 can establish more than 256 connections. Its range starts from 0 255. This connection is really helpful in internet cafe setup. Normally IPv4 is set to default which detects IP automatically, but we can define IPv4 manually as well which can be allocated. Manual configuration can change IP of the system for some purposes as well. Sub-netting plays an important role in networking. It is a subdivision of an IP network or when the network is divided into several small networks. It results in logical division of an IP address. Subnetting an IP can be done for the various reasons which generally include different physical media, address space, security, control network traffic etc. Subnetting makes it easier to manage the smaller network as well. Subnet masks are also used with IP. Computer performs a bitwise logical AND operation between the address and subnet mask in order to find the Network Address or number. The general syntax for Subnetting is 255.255.255.0 There are generally three classes used for Subnet masks Class A: 255.0.0.0 Class B: 255.255.0.0 Class C: 255.255.255.0 Calculations of Network Subnetting: We have to implement a network with single registered IP which is given by our service provider. 195.5.20.0 This is known an IP address. The default subnet mask for this one would be 255.255.255.0 We have to implement 4 networks and they should be provided with different IP addresses. We use the following steps to find out the network and host computers over the network and range as well 195.5.20.0 255.255.255.0 We use 8 bits for binary written form. 255.255.255.0 = 11111111.11111111.11111111.00000000 This is default Subnet of network We have to implement four networks in a network, so we will do with 4 in binary 2 4 2 2 0 1 0 4 Decimal = 100 binary We will take 3 bits as a result of binary conversion from bit scale. The bit scale helps in implementing a network more easily 128 64 32 16 8 4 2 1 We will take 3 bits for new subnet mask and new Subnet mask will be 11111111.11111111.11111111.11100000 This will be equal to 255.255.255.224 Our new IP range will be 195.5.20.0 195.5.20.31 195.5.20.32 195.5.20.63 195.5.20.64 195.5.20.95 195.5.20.96 195.5.20.127 This is our range of new 4 Networks made by Single registered IP. Network Layout Diagram: Analysis and Synthesis: This research is a conceptual base in which most of the prediction has also been used apart from research on different structures and equipments used in this setup. A concept has been taken from http://www.ccautosoft.com/2011/03/connecting-all-hardwares-in-internet-cafe/ which shows the setup for the internet cafe. This is was quite helpful in equipment structure. This project has been designed to improve the performance of internet cafà © setup with compare to new technology as of library or lab network. Conclusion: This has been concluded from this project that it is reliable and secure network. It can easily give access to all the computers equally. There is less risk of virus spreading over the network as secure switches have been used which gives the high profile for Firewall and other activities. This project uses the latest technology routers and switches which enables the network to communicate more effectively. Also this project is cost effective, and it allows less cost to be spent over the network. Computers have been used with moderate specifications which are compatible to run over network properly.

Pestel Analysis Of The Steel Industry Economics Essay

Pestel Analysis Of The Steel Industry Economics Essay Indian steel is doing well from many years. Steel industry is contributing near about 1.2% in the total GDP. Because of the industrial growth and other important developments happening all over the world the so rapid rise in demand of the steel is observed in this sector. The major players in the steel industry are SAIL (Steel Authority of India.) TATA STEEL and ESSAR STEEL. Indian steel mainly contributes in the finished steels, semi-finished steel, pig iron and stainless steel. Private sector plays very important role in the Indian steel industry. The private sector in the steel industry contributes approximately 2/3rd of the total market of the steel. With the growing position steel industry is supporting in the continuous growth in the economic. Asian countries are in the lead with the production of the steel, china is the top producer among the Asian countries which are contributing high a supply of the steel in the international market.419million ton of the steel is produced only in the china. In past 6 years there are many acquisitions and mergers are happening in the steel industry. May be this could be the one of the reasons behind this tremendous growth globally. After the china country, Japan, India, and South Korea. India is contributing total of the 53million ton steel in global market. The japan is producing only 9% of the steel which is contributed to the global steel market. India is also one of the major counties in the production of the steel. The east, south, and west regions are important for the steel industry in India. The rapid expansion is expected in the east region, Orissa because the availability of the superior raw material. In India because the vast availability of resources and major industry player s India is enjoying the boom in this sector which are responsible of the growth in the GDP according to the survey which is done by the DEUTSHE BANK where the analysis is done with detailed survey of 34 economies in nation. It is observed that India will enjoy the average growth of 5.5% in between the year 2006 to year 2010. The average is observed for the, where as 5.4% to the Malaysia. The opening up the economies in the global market is responsible for the high investment in the industry sector where lots of acquisitions and mergers are happening in the industry. The PESTEL ANALYSIS of the industry is divided into five parts which can be discussed as follows: P- political analysis E-economic analysis S- socio -culture analysis T-technological analysis E-environmental analysis L-legal analysis. POLITICAL ANALYSIS: Political analysis includes the factors which can influence the business. It is included the political factor which includes the policy offered by the government to the specific sector. Here for this sector government introduces the National Steel Policy. The main aim for the introduction of this policy is to fill the gap between the demand and supply of the steel. To maximize the production is also main activity is designed under this policy. To increase the production up to million ton is also the main objective of the policy. Under this policy the special incentives are designed for the steel sector. Incentives like the cut in the duty, zero duty on imports, provision of the land and other infrastructural facilities are the facilities provided for the steel sector. Under this policy the government is encourage to the use the full opportunities available in the PUBLIC AND PRIVATE PATNERSHIP (PPP). With the growing industry the government is increased the sales tax from the 15%to 20% where as 75% FDI (foreign direct investment) is allowed in the industry this scheme also provides the various concessions in the custom duties. Though there is a rise in the infrastructure facilities in the country but considering the steel industry the present condition of the infrastructure is not sufficient in the nature .because of the lack in infrastructure steel industry is facing many problems ECONOMICAL ANALYSIS: STEEL industry is concern to be a very booming industry from past decades. Opening up with the various economies the foreign direct investment is the happened in this sector the various foreign players are interested to invest in the country. Under the various economies schemes there is permission in advance licensing scheme which allows the duty free imports of raw material for exports. But, with the boom in the industry GDP is rising at very slow rate. The steel industry is also facing the problem of the subprime crisis occurs in the united states before 15 months. Because of the subprime crisis there is ill effect occurs in the automobile industry, infrastructure and other business which are related with the steel industry. There is huge gap between the demand and the supply of the steel in the society. SOCIO- CULTURE: The socio culture is one of the important aspect in the analysis of the industry it describes the impact of the particular industry on the society. Likewise the steel industry also give the encouragement to the permanent employment to the people but on the other hand it divides the area in to the rural and urban sector because the industry is only in the particular area only which leads to the particular development of that area only and not overall the development . because of the working conditions the people which are employed in the steel industry faced many health problems which are incurable in the nature and many industries are not paying the attention on the health of the employees. Any kind of the allowances are not given to the employees. Steel industry is also responsible for the development in the rural sector which leads to the rise in the standard of the living of the people. TECHNICAL: The traditional technologies are being used from many years in the industry. There is no innovation in the use of the technique in the production process. The Tata steel is developing the same technique is by which the encouragement is given to the trading of the steel. Tata and sail introduces the online trading of the steel. Only the electric furnace is being used now days in the production process but because of the fluctuations in the energy there is wastage in the raw material. The basic technologies are used in the production process are basic arc, induction furnace and electric furnace which are outdated in the nature. Sail the one of the leading steel industry India is planning to set up a plan with PASCO for using the latest technology named à ¢Ã¢â€š ¬Ã‹Å"FINEXà ¢Ã¢â€š ¬Ã¢â€ž ¢. ENVIRONMENTAL: Though the steel industry is encouraging the many sectors and the encouraging the development it is creating the unfavorable environment in the nature. The all leading industries are following the environmental acts which are declared by the governments, though it is creating very bad impact on the environment. Many industries are using the pollution control equipment and energy saving equipment but that is not sufficient in the nature. The least importance is given to the environmental aspect. But the Tata steel is encouraging the ecofriendly system, to reduce the emission the co2 gas during the production process. Tata is developing the Ultra-Low Carbon steel making where there will be reduction in the environmental loss. LEGAL: Government is introducing the various rules and regulations of this particular industry. The government is about to paying the more attention in the health policies of the employees which are working with the steel industry. Special health incentives and rules are introduced in the steel industry. Conclusion: From above discussion and surveys we come to know about how the pestel analysis is done in the industry we also come to know about the political, economic, and technical aspect are important for the development of the particular industry if these factors are not in the supporting in the favor of the industry then the industry may face some consequences. REFERENCES USED: www.wikipedia.org. www.scribd.com

Braham Stokers Dracula :: Dracula Essays

Free Essay on Dracula In the novel Dracula there are many qualities that are necessary for success. Firstly determination is a key factor to succeeding; secondly revenge is a factor in succeeding; furthermore fearlessness plays a big role when they go to kill Lucy; lastly intelligence is needed to make all the plans. When Jonathan Harker get captured by Dracula he is afraid, but he is also determined to get free. "I can not say in this room much longer for I shall die," he said. A small crack of light appeared through the stones. "I pushed the stone with all my might but it only move, I found a carving utensil which I used to make the hole bigger" said Jonathon. "The hole got bigger and bigger then the stone just fell out." When Jonathan Harker and the rest of the people go to hunt Dracula they are determined to kill him because they do not want Dracula to kill anyone else. In order to kill Dracula they must plunge a stake through it's heart, cut off it's head, and stuff it's mouth with garlic. They use silver knives to kill him just as the sun sets. "Get him before he flees" said Jonathan, "he must not get away." Arthur proceeds with the stake cautiously. "I got him" yelled Arthur. Abraham shoves a clove of garlic in the Count's mouth. "get him before he tries to get away." Jonathan and Quincey, use silver knives to cut off his head. "We have finally done it we killed Dracula" said Quincey. Jonathon was determined to escape. Arthur, Abraham, Jonathan, and Quincey are determined to kill Dracula. In order to get out of the Count's castle Jonathan thinks of three things survival, escaping and kill the Count for trapping him in the castle. "I can't die I have to get out, I have to end his rain of terror, he can`t get away with what he did to me" said Jonathan. This shows that Jonathan Harker wanted to kill Dracula through revenge, but he also killed him so Dracula would not kill anyone else. When Van Helsing, Holmwood, Seward, and Quincey Morris go to kill Lucy they must be fearless of the un-dead.

gatcolor Color Symbols and Symbolism in The Great Gatsby :: Great Gatsby Essays

Color Symbolism in The Great Gatsby Colors can symbolize many different things. Artists use colors in their paintings when they want you to see what they are trying to express. Like if an artist is trying to express sorrow or death he often uses blacks blues, and grays basically he uses dreary colors. You automatically feel what the artist is trying to express. When the artist uses bright colors you feel warm and you feel happiness. In the novel The Great Gatsby, F. Scott Fitzgerald is like an artist. He uses colors to symbolize the many different intangible ideas in the book. He uses the color yellow to symbolize moral decay decadence and death. Then he uses the color white to symbolize innocence. He also uses the color green to express hope. Fitzgerald's use of the color green the strongest. Although these are not the only colors that Fitzgerald uses for symbolism, they are the ones that he expresses the most. This book is a very colorful book in the sense that it uses colors to cover so many different aspects of peoples lives. Fitzgerald uses the color yellow to symbolize moral decay. On (Page 18) he writes " The lamp-light, bright on his boots and dull on the autumn-leaf yellow of her hair." He is talking about Tom and Jordan Baker, and he is suggesting that tom might be heading for moral decay. In the book there are several things that Tom does that might prove this. First of all Tom is having an affair with Myrtle Wilson. A second thing is that he does not like Gatsby, and several times he tries to prove that he is not who he says he is. Tom even hires a detective to prove this. Gatsby had a Rolls Royce that was yellow "His station wagon scampered like a yellow brisk-bug . . ." (Page 39). Gatsby's car was referred to many times in the book, but it was always referred to as "The yellow car" (Page 157). The color yellow was used most frequently when there was a death. One of the first things that Fitzgerald wrote about when Myrtle died was when they laid her on a table in the garage.

Vietnam Essay -- essays research papers

Vietnam War   Ã‚  Ã‚  Ã‚  Ã‚  The Vietnam War was truly one of the most uncommon wars ever fought. This conflict was so hostile and ironic, that the official beginning and end could never be identified, or pinpointed. Likewise, the enemies and the allies looked exactly alike. This turmoil made everyone in the war confused, because â€Å"anyone† could be a friend by day, and foe by night. Additionally, what made the war so difficult was the tactics used by many soldiers. These tactics were called â€Å"Guerrilla Warfare,† which consisted of the simple process of â€Å"hide, shoot, and run.† Surprisingly, this fighting technique matched the skills of many of the best-trained soldiers from the opposite side.   Ã‚  Ã‚  Ã‚  Ã‚  The Vietnam War fought between the communist North Vietnam, and the non-communist South Vietnam was supported by the United States. The main objective of the war was to contain the leader. Ho Chi Minh, was the leader of the â€Å"league for the independence of Vietnam,† generally known as the Viet Minh. The league was organized in 1941 as a â€Å"nationalistic party†; their goal was to seek Vietnamese independence from France.   Ã‚  Ã‚  Ã‚  Ã‚  South Vietnam did not have the resources of modern military technology; therefore, the capacity of depending on themselves, was minimum. The United States were allied with South Vietnam, and they made a massive deployment, that begun in the spring of 1965. The deployment consisted of and initial wave of... Vietnam Essay -- essays research papers Vietnam War   Ã‚  Ã‚  Ã‚  Ã‚  The Vietnam War was truly one of the most uncommon wars ever fought. This conflict was so hostile and ironic, that the official beginning and end could never be identified, or pinpointed. Likewise, the enemies and the allies looked exactly alike. This turmoil made everyone in the war confused, because â€Å"anyone† could be a friend by day, and foe by night. Additionally, what made the war so difficult was the tactics used by many soldiers. These tactics were called â€Å"Guerrilla Warfare,† which consisted of the simple process of â€Å"hide, shoot, and run.† Surprisingly, this fighting technique matched the skills of many of the best-trained soldiers from the opposite side.   Ã‚  Ã‚  Ã‚  Ã‚  The Vietnam War fought between the communist North Vietnam, and the non-communist South Vietnam was supported by the United States. The main objective of the war was to contain the leader. Ho Chi Minh, was the leader of the â€Å"league for the independence of Vietnam,† generally known as the Viet Minh. The league was organized in 1941 as a â€Å"nationalistic party†; their goal was to seek Vietnamese independence from France.   Ã‚  Ã‚  Ã‚  Ã‚  South Vietnam did not have the resources of modern military technology; therefore, the capacity of depending on themselves, was minimum. The United States were allied with South Vietnam, and they made a massive deployment, that begun in the spring of 1965. The deployment consisted of and initial wave of...

Contingency Theory of Leadership Essay

At my workplace we have sales goals that we have to meet and part of my job is to ensure that the staff is achieving their goals and if they are falling behind, I help them find ways to better their selling skills and recognize opportunities. In the table below, categorize different leadership approaches that could be used in the work environment you have described. Provide different suggestions for each of the four approaches to leadership. Directive approachSupportive approach The company has weekly product knowledge training so that the employees know about the products that they are selling. The employees are also rewarded incentives that relate directly to their goals and are aware of their job duties (Jones, 2007) and new procedures shared in our weekly meetings. The individual goals also relate to work schedules the full time employees goals are higher than the part-time employees. The supportive approach to leadership of this group the management is open and very approachable (Jones, 2007). The management also has goals to meet and are always willing to offer advice and additional training to employees. They also meet with employees individually and find out what motivates that specific employee because everyone is different. Participative approachAchievement-oriented approach The employees participate in creating individual goals for themselves (Jones, 2007) and for the branch. They create in-branch promotions and try to make sales fun. Employee suggestions for improvement are put into action and employees are commended for their work ethics and participation with branch promotions. The goals that are set for the employees are realistic, not outrageous (Jones, 2007). By observing the amount of branch traffic, and amount of customers that do not currently have a specific product we can set goals that are achievable.

Expenditures and Revenues Matrix and Summary Essay

Budgets are significant in the budget formulation process. Budgeting as a tool is the make-up of public policy (Smith & Lynch, 2004). Budgets exist at all levels of government, local, state, and federal. When describing revenue sources in public budgeting, it is important to describe the source of revenue, the source of the funding, importance of informed financial decisions, financial analysis tools used, and organizational financial analysis alternatives (University of Phoenix, 2012). What is a Budget? A budget is a plan of allocation of resources to accomplish and organizations’ objectives and goals for a specific amount of time (Ganapati, n.d.). The budget gives a detailed analysis of how an organization will spend and receive money in a fiscal period. Why is a Budget Required? Accountability and prioritization are two reasons for a budget requirement. Accountability refers to the taxation of the public, which means that the government cannot tax more than required for government purposes (Ganapati, n.d.). Prioritization refers to allocating funds and resources to areas that require priority over another area (Ganapati, n.d.). Public Budgets There are different budget cycles at the local, state, and federal levels; however, the major components of any budget, regardless of government level are revenues and expenditures. Revenues Revenues are funds raised through various entities. â€Å"Revenue estimation is very important in local and state government, particularly in the planning and analysis phase because elected leaders must balance their budgets† (Smith & Lynch, 2004, p. 47). Federal Government Revenues Granted, the federal government collects the most amount of tax, state and local governments have more options on taxing. For example, the federal government taxes individual and corporate taxes, manufacturing taxes, social security tax (Federal Insurance Contributions Act, FICA), estate or inheritance tax, and borrowings such as treasury bonds. State Government Revenues State government also receives money through tax revenues as well as other entities. State governments receive money through intergovernmental transfers, individual and corporate taxes, sales taxes, fuel taxes, estate and inheritance taxes, special taxes on items such as alcohol and tobacco, lottery, state bonds, and licenses. Examples of states receiving taxes on licensing include motor vehicles, hunting and fishing, firearms, motor vehicle operators, public utilities. Local Government Revenues Like the federal and state governments, local governments of cities and counties also receive revenues through intergovernmental transfers, local taxes of property and sales tax, local bonds, school districts, businesses, and water management. Local governments differ in review and deciding of budgets. Many local budgets use line item for expenditures and revenues. Expenditures Expenditures are funds for spending on specific programs or capital projects. Expenditures include public programs, capital projects, debt servicing, and administration. Public programs can be education programs, welfare programs, medical programs, environmental programs, and housing programs. Capital projects include construction and reconstruction of highways, sewage, water, utilities, and building costs. Administration includes city and county employees. Decision-Making Managers and administrators today must prepare to make difficult financial decisions. Analytical tools and processes are important in decision-making, planning, control, and analysis of financial budgets. Managers must identify potential financial problems and formulate alternatives (American Management Association, n.d.). Financial Decisions Financial decisions vary depending on size of the organization, needs of the organization, location of the organization, financing options available to the firm (American Management Association, n.d.). Analysis Tools Techniques in financial analysis are significant in the financing and budgeting of an organization include long-term and short-term planning, security of costs and benefits, investment decisions, financing decisions, and dividend policies (American Management Association, n.d.). Conclusion Most budget approaches involve time, planning, decision-making, analysis, accountability, and prioritization at the local, state, and federal levels of government. Two major components at each level are revenues and expenditures, which is how each level of government earns and spends money. References American Management Association. (n.d.). Financial decision-making. Retrieved from http://www.flexstudy.com/catalog/schpdf.cfm?coursenum=96088 City of Milwaukee. (2012). Retrieved from http://city.milwaukee.gov/ImageLibrary/User/crystali/2012budget/2012proposedbook.pdf U.S. Department of Justice. (2012). Federal Bureau of Investigation financial report fiscal year 2011. Retrieved from http://www.justice.gov/oig/reports/2012/a1216.pdf Ganapati, N. (n.d.). Budgeting. Retrieved from http://www2.fiu.edu/~ganapati/3003/budget.html Smith, R. W.; and Lynch, T.D. (2004). Public budgeting in America, (5th ed.). Upper Saddle River, NJ. Pearson/Prentice Hall. University of Phoenix. (2012). Course design guide. Retrieved from University of Phoenix, AJS522 – Finance and Budgeting in Justice and Security Wisconsin Department of Public Instruction. (2010). Wisconsin Department of Public Instruction. Retrieved from http://dpi.state.wi.us/pb/pdf/combinedfair.pdf